Tests on Photovoltaic Devices

Surge Protection Device

Our laboratories can perform tests on tension up to 1500 V and current up to 180 A.

  • Standard EN 53539-11
  • Standard IEC 61643-31
DPS
chave

CC Disconnect Switch

Our laboratories can perform tests on tension up to 1500 V and current up to 180 A.

  • Standard IEC 60947-1
  • Standard IEC 60947-3

Do you want perform another test?

FAQ

The tests reports issued by INRI are available on an electronic platform to verify its authenticity. This platform can be accessed through: www.ufsm.br/labensaios The document access is restricted to who possess the alphanumeric key of 16 digits. That key is provided only to the customer by email at the end of the test. To check how the system works, access the model report 8888.8888.8888.8888 .

The time is varying in 1-2 days. To obtain this information, request a budget informing all the technical data of the photovoltaic device to be tested.

The amount charged is varying according to the complexity and time required to perform the tests. To obtain this information, request a budget informing all the technical data of the photovoltaic device to be tested. It is suggested that customers send the datasheet of the devices.

After the budget request, a payment of 50% of the value of the proposal must be made for the tests be reserved in the laboratory agenda.

The customer is responsible for the formalities to move the devices from their origin place until the laboratory and vice and verse. The laboratory is responsible only for the opening and packaging of the devices. All the costs for transportation of the devices are from customer responsibility and it is not including on the proposal provided by INRI.

The devices must to be send by shipping company or post offices. The INRI address is Av. Roraima n° 1000, building 9E, room 117, district: Camobi, city: Santa Maria, state: Rio Grande do Sul, CEP 97105-900, mailbox: 5101.